 |
Description ：The introduction of new product:
The function of this machine is fixing the pin & box automatically onto the open-end zipper or two-way open-end zipper which has been welded with film and punched.
This machine is applicable to different specifications of nylon/metal open-end/close-end zippers, including No.3, No.4, No.5, No.7, No.8 and No.10.
The advantages of this machine:
1. By adopting human-machine interface control, this machine can be operated easily. What’s more, the production capacity can be shown on the screen clearly.
2. After solving all the disadvantages of other manufacturers, this machine is much more user-friendly. If the machine stops suddenly in operation, the screen will show where the problem is. It is very convenient for the
operator to check and repair. If the pin or the box is run out of materials, the operator doesn’t have to stop the machine and pull the zipper backward. The only thing needed to be done is to press the re-feeding bottom on the screen, then the pin or box can be fed automatically.
3. With special punching design, this machine firstly press and fix the pin & box and then punch the punching pin in order to avoid distortion of the pin & box and improve the quality. What’s more, the punching
pin can be used 1,000,000 times. As a result, the production cost is reduced while the quality of the zipper is improved.
4. The order amount can be set. When the machine has finished the amount set, it will stop automatically. As a result, the production cost can be reduced.
5. The machine has the advantages of high productivity and good stability with its output around 1,500PCS/H.
|